Location

Matamorosa (Cantabria), España

Descripció

Autoclave. Fabrica sector conservero - Yanagiya

Fabricante: HIRAYAMA Modelo: Hiclave HG-80 Año: 2006 Observaciones: SPECIFICATIONS OF HG-80 AUTOCLAVE Outside (19.7W x 27.2D x 35.0H) in Dimensions (455W x 691D x 890H) mm Chamber (14.3D x 28.7H) in, Dimensions (364D x 730H) mm Chamber Volume 76L working, 85.1L actual Temperature Range 105°C to 135°C Sterilization Timer 1 to 300 minutes Media Warming/ Holding Temperature Programmable at 45°C to 60°C to keep media warm up to 24 hours Auto-Start Timer Initiate a cycle 1 to 99 hours later Cooling Fan Switch to turn fan on or off Air Removal Timer Programmable, 3 to 9 minutes after temperature has reached 97°C Steam Venting Selectable from: No venting and three other venting rates Temperature for Release of Lid Interlock Programmable, 60°C to 97°C for greater safety and flexibility Sterilization Program Cycles 1) Liquid cycle, 2) Agar (liquid with warming) cycle, and 3) Solid cycle Additional Cycle for Agar Dissolution Cycle for dissolving and keeping agar warm (no sterilization) Agar Dissolution Protocol Initially at 60°C-100°C for 1-60 min, then at 45°C-60°C for up to 24 hours. Safety Features Circuit breaker with GFCI, low-water power cut-off, over-temp power cutoff, over-pressure power cut-off, safety valve (0.26MPa gauge), sensor for improper lid closing Steam Condenser 15-liter water tank Drain Water Bottle 2 liters Power Requirements 220V, 50/60 Hz, single phase Power Consumption 3.7 kilowatts